Based on years of field construction and maintenance experience, Hisan has developed repair welding wires and wear solutions for different conditions. They are widely used in coal, cement, steel, and power industries. Industrial roller repair wires are a cost-effective choice. We offer old roller refurbishment and new roller hardfacing services during routine shutdowns, on-site and in house repairs are both available.
Hisan wear plate welding wires are developed based on our many years of industrial experience in different working conditions. This guarantees excellent performance of low welding spatter and high recovery. The high chromium carbides provide good combination of wear resistance and metallurgical bonding properties. It can resist to severe abrasion and moderate impact. Application: single layer, double layer, multiple layer hardfacing. Diameters: 2.4mm, 2.8mm, 3.2mm, etc.
Hisan gas shielded flux cored welding wire is mainly used for repairing worn parts subject to abrasive wear, such as gears, mining machinery components, buckets, and middle troughs. Depending on the damaged area, the hardfacing thickness can reach 50mm. Advantages: low welding spatter, easy slag removal, and good weld formation.
No arc breakage occurs during welding, with a deposit efficiency exceeding 90% after hardfacing.
Uniform wire diameter, smooth wire feeding and no joints.
Independently developed to suit various working conditions.
Low spatter and minimal fume; no peeling after welding with uniform stress release.
